For players

Tap Tempo BPM Finder

Tap along to a song to measure its tempo in beats per minute.

Tap Tempo BPM Finder

How tap tempo works

Every tap records a timestamp. The interval between consecutive taps is one beat, and the tempo is 60,000 divided by the interval in milliseconds. A single interval is unreliable because human tapping varies by 10 to 30 ms from tap to tap, so the finder uses the median of your recent intervals, which ignores the odd early or late tap, and shows how consistent your taps are. Eight or more taps give a stable figure; sixteen give an excellent one.

Half time and double time

The most common tap tempo error is not inaccuracy but ambiguity. Tapping on every other beat halves the reading; tapping on every eighth note doubles it. If a house track reads 64 BPM, you have tapped on half notes, and the real tempo is 128. Genres help decide: hip hop typically sits at 85 to 95 BPM, house at 120 to 128, techno 125 to 135, drum and bass 170 to 175, and dubstep around 140 with a half-time feel that invites tapping at 70. Listen to where the kick and snare sit, and tap the pulse a dancer would move to.

When the tempo is not constant

Songs recorded without a click track drift, often speeding up into choruses and settling in verses. A tap tempo reading is an average over the taps you made, so tap the section you care about. Classical recordings may vary more still, with deliberate rubato. For DJ beat-matching of electronic tracks, which are almost always at a fixed tempo, a sixteen-tap reading is usually within half a BPM.

Keyboard beats mouse

Tapping a key is more consistent than clicking a mouse, and much more consistent than a touchscreen with its variable response. Use the space bar when you can, keep your hand relaxed, and let the first few taps settle before trusting the number. Resetting starts a new measurement; the finder also resets itself if you pause for more than two seconds.

How to use it

  1. Play the song and find the main pulse.
  2. Tap the button or press the space bar on each beat.
  3. Keep tapping until the reading settles, ideally sixteen taps.
  4. Check whether half or double the result fits the genre better.

From the rehearsal room

Why does the BPM jump around at first?

With only a few taps, one early or late tap has a large effect. The median becomes stable after about eight taps. Keep tapping steadily and the reading will settle. If it keeps wandering after sixteen taps, the recording itself may be drifting in tempo, which is common in live performances.

My reading is half what I expected. What happened?

You were tapping every other beat. Many songs can be felt at two different pulses, especially slower hip hop and half-time drum patterns. Double the result, or tap along with the hi-hat rather than the kick and snare.

How accurate is tap tempo?

With sixteen consistent taps, usually within one BPM. The consistency figure shows how steady your tapping was; a high spread means the song drifted or the taps were uneven. For a precise figure on electronic music, tap two separate runs and compare them.

Can I use this to set a delay pedal or plug-in?

Yes. Take the BPM into the delay time calculator to get the millisecond value for quarter notes, dotted eighths and other divisions. Many pedals also have their own tap switch; the measured BPM is a useful check that you tapped it correctly on stage.

Disclaimer: Tempo, tuning, and harmony results follow standard twelve-tone equal-temperament conventions and are intended for practice and production reference. Keep volume moderate, especially with headphones, as prolonged loud listening can damage hearing. Chord and key detection is a best guess and should be checked by ear.