Practice 4 min read Updated 2026-10-08

Practise with a Metronome Without Rushing

Find a clean starting tempo, raise it in small steps, and move the click to hear your own time.

A metronome can build good time or rehearse bad habits. The difference is where you set it and how you move it. Most players set it at the target tempo, scramble to keep up, and practise their mistakes at speed. This guide uses the metronome the way teachers recommend: start where the passage is clean, climb in small steps, then gradually take the click away so the time becomes yours.

Step 1: find the target tempo

If the piece has a metronome mark, use it. If you are learning from a recording, measure it with the tap tempo tool: tap along for at least eight beats, and check whether the result should be halved or doubled for the style. That number is the destination, not the starting point.

Step 2: start where it is clean

Play the difficult passage at a slow tempo and raise it until you find the fastest speed at which you can play it accurately and relaxed, several times in a row. That is often 60 to 70% of the target. Accuracy means the right notes, the right rhythm and no tension creeping into the shoulders or hands. If you make the same mistake twice, the tempo is too fast.

A worked example

A guitar solo has a target of 120 beats per minute. You can play it cleanly at 84 BPM, 70% of the target. Raising the metronome by 4 BPM after every three clean repetitions takes nine steps to reach 120: 84, 88, 92 and so on. You will not climb all nine in one session. A realistic plan is two or three steps a day, starting each session a couple of steps below yesterday's best, because the hands need a few minutes to settle. Over a week or two the passage reaches tempo without the mistakes that rushing would have built in.

Step 3: subdivide to catch rushing

Most players rush rather than drag, especially in fast or exciting passages. Setting the metronome to sound eighth or sixteenth notes between the beats exposes exactly where you hurry: you will hear yourself arriving before the subdivision click. Use subdivisions while learning a passage, then go back to quarter notes once it is steady.

Step 4: move the click

Once a passage is solid with the click on every beat, make the metronome do less. Put the click on beats two and four only — set the metronome to half the tempo and treat each click as the backbeat — which trains the feel that swing, funk and much popular music depend on. Then try one click per bar, or a few bars of click followed by a silent bar. If your time holds when the click returns, the time is really yours. If you have drifted, you have found the next thing to practise.

Step 5: practise without it too

Play the passage without a metronome and record yourself. Listen back with the metronome running at the target tempo, or tap along to the recording with the tap tempo tool, to see whether you held the tempo or crept faster. Ensembles do not play with clicks, and the aim of metronome work is to stop needing one.

Look after your hearing

Keep the click at a comfortable level, especially through headphones, and take short breaks. A click loud enough to hear over an amplified instrument is often louder than it needs to be.

Checklist

  1. Find the target tempo from the score or with tap tempo.
  2. Find the fastest tempo at which the passage is clean and relaxed.
  3. Raise the metronome 4 or 5 BPM after several clean repetitions.
  4. Start each session a little below the previous best.
  5. Use subdivisions to find rushing, then move the click to two and four.
  6. Record yourself without the click and check the tempo.